Home >

Slitting machine, Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500, paper slitting and rewinding machine

Categories Slitting and rewinding machine
Model Number: ZST-2500
Place of Origin: China
MOQ: 1 set
Payment Terms: T/T
Supply Ability: 10 sets/Month
Delivery Time: 60 days
Packaging Details: Wooden Case
Slitting machine: Shelf Type PLC Controlled Paper Slitter
Max Jumbo roll width: 2500mm
Min Jumbo roll width: 400mm
Paper GSM range: 80-450g
Diameter of roll: Ø2000mm
Diameter of rewinding: Ø1200mm
Unwind diameter of paper core: 3’’ and 6’’
Rewind diameter of paper core: 3’’
Width of rollers: 2550mm
Slitting speed: 10-350m/min(according to material)
Tolerance of EPC: ≤0.1mm
Range of EPC: ±75mm
Min.width of produce: 50mm-2500mm
  • Product Details
  • Company Profile

Slitting machine, Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500, paper slitting and rewinding machine

Slitting machine, Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500, Jumbo Roll paper slitting and rewinding machine

Slitting machine, Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500, Jumbo Roll paper slitting and rewinding machine is mainly used to slit stick paper, craft paper and other kinds of paper


Main mechanical configuration:

1. Main body unit:

1.1 Machine’s main body adopts 80mm thickness cast iron and steel structure.(cast iron after secondary operation and setting treatment). Holders adopt seamless steel tubes. Make totally machine stable.

1.2 Main driving roller adopts seamless steel pipe (after tempering, surface hardening, chrome plated,mirror surface, dynamic balance treatment). Servo motor driving.

1.3 Main driving press roller adopts rubber roll (nitrile-butadiene rubber)

1.4 Material guide rollers adopts steel rolls (aluminum alloy) and rubber roll (nitrile-butadiene rubber)

1.5 Driving mode of main body and rewind shafts adopt synchronizing wheel and belt.


2. Unwinding unit:

2.1 Unwind unit adopts shaft-less automatic hydraulic lifting up. Using special 3’’ and 6’’ chuck. Not damage the inside paper core. Left and right arms’ moving is through the guide rails and hydraulic cylinders.

2.2 Unwind hydraulic cylinder can lifting 3 tons paper weight. Easy operating and fast.

2.3 set bias adjustable device can fine tune left and right, forward and backward through hand wheel. Range is ±20mm.

2.4 Unwind tension’s actuator is 2 sets Italy brand RE pneumatic brake. through PLC and Japanese brand SMC proportional valve to achieve a constant tension.

2.5 EPC uses TAIWANESE brand PAUSOURCE corrective device, it can achieve guide function by material’s edge. Left and right moving is through servo motor and guide rail.

2.6 Material’s route adopts bridge type. Easy operating.


3. Rewinding unit:

3.1 Rewinds adopt surface rolling structure. 2 sides rewind shafts(A/B). Also can single shaft rewinding.

3.2 Rewinds back to front moving is through guide rail and pneumatic cylinders.

3.3. Rewind tension’s actuator is 2 sets servo motor. through PLC to achieve a constant tension.

3.4 Rewind press rollers are 2 steel roller(with mirror treatment)

3.5When slitting finish, hydraulic cylinders will automatic downloading paper to ground. Easy operating.

3.6 Slitting knives are controlled by pneumatic cylinder (10 sets circle knife). Can be fine tuned.

3.7 Equipped with a vacuum-type waste edge exclusion system, use the strong force adsorb the waste edge out away


Main technical parameter of Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500:

Max Jumbo roll width2500mm
Min Jumbo roll width400mm
Paper GSM range80-450g
Diameter of rollØ2000mm
Diameter of rewindingØ1200mm
Unwind diameter of paper core3’’ and 6’’
Rewind diameter of paper core3’’
Width of rollers2550mm
Slitting speed10-350m/min(according to material)
Tolerance of EPC≤0.1mm
Range of EPC±75mm
Min.width of produce50mm-2500mm
Up circle knife dimensionØ125*70*50mm
Down circle knife dimensionØ100*70*20mm
Total power80KW
Weight20000Kg
overall dimension (L X W X H)11000mm×4000mm×2200mm

Main configurationof Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500:

PLCMITSUBISHI(JAPAN)
MAIN MOTOR INVERTER 1PCSYASKAWA(JAPAN)
REWIND MOTOR INVERTER 2PCSYASKAWA(JAPAN)
TOUCH SCREENMCGS(CHINA)
EPC CONTROLLERPAUSOURCE(TAIWAN)
EPC DRIVERPAUSOURCE(TAIWAN)
EPC SENSORPAUSOURCE(TAIWAN)
PNEUMATIC BRAKE 2PCSRE(ITALY)
MAIN SERVO MOTORDANMA(TAIWAN)
REWINDING SERVO MOTOR 2PCSDANMA(TAIWAN)
MAIN PNEUMATIC ELEMENTAIRTEC(TAIWAN)
PROPORTIONAL VALVESMC(JAPAN)
HYDRAULIC ELEMENTCHINA
ENCODEROMRON(JAPAN)
MAIN BEARINGNSK(JAPAN)
FAN BLOWERCHINA
GUIDE RAILTBI(TAIWAN)
AIR SHAFT FOR REWINDING 2PCSYUKE(CHINA)
LOW-VOLTAGE APPARATUSSCHNEIDER(FRANCE)
BUTTON AND SWITCHSCHNEIDER(FRANCE)

Spare part listof Shelf Type PLC Controlled Paper Slitter ZST-2500:

01inner hexagonal spanner1set05oil gunPc
02Monkey spanner1pc06air gun1pc
03a-liner screwdriver1pc07air tap2pcs
04Cross screwdriver1pc08operation instructions1pc

Contact Person:


Kaiyan Liang Qingdao ZFC Trading Co.,Ltd
Room 3620, 88 Anshan 1st Road, Qingdao, China
Tel: 0086 532 5851 9016?
WhatsAPP: 0086 13906390477
WeChat: zfc-lky
liangkaiyan5507@126.com
Quality Slitting machine, Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500, paper slitting and rewinding machine for sale
Send your message to this supplier
 
*From:
*To: Qingdao ZFC Trading Co.,Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly