Categories | 4G Wifi Module |
---|---|
Brand Name: | Aleka |
Model Number: | ME660 |
Certification: | CCC CE |
Place of Origin: | SHENZHEN |
MOQ: | 1000pcs |
Supply Ability: | 1000,000pcs per month |
bands: | 2G/3/G/4G full bands |
dimension: | 30mm×30mm×2.5mm |
weight: | <4.2g |
industry: | for any product that need data transmission |
2G 3G 4G wireless module cellular module for internet of things
The ME660 module USES the MINI PCI Express interface, which can be
built into the MINI PCI Express interface of laptop, MID, PDA,
tablet and on-board, so that these terminal devices have wireless
communication functions. With the mobile network LTE TDD 600MHz
coverage, the terminal that embedded with the ME660 module can
connect the Internet and make video transmission business at any
time.
MZ660 PCIE module specifications sheet | ||
Item | Description | |
Product Name | PCIE Module | FDD-LTE Mini PCI-E 52PIN Module |
Technical Specifications | FDD-LTE | 3GPP R9 download speed 150 Mbps upload speed 50 Mbps |
Band | FDD-LTE | A band:566~626MHz B40 |
The power rating | FDD-LTE | 29±2dBm |
Software function | Data business | Support PPPD/RNDIS/ECM dial |
Voice calling | Support hard PCM voice | |
Phone book | Support SIM/USIM card phone book | |
TCP/IP protocol | IPv4,IPv6,IPv4/IPv6 double stack | |
Operation system | Support windows/Linux/Android | |
Hardware interface | Interface form | Mini PCI-E 52PIN |
Power supply | Range 3.2V~4.2V ,recommend value 3.6V | |
LED | Module status indicator light function | |
SIM/USIM card | standard 6-pin SIM card interface,3V/1.8V SIM card | |
USB agreement | USB 2.0 High speed | |
Memory(DDR RAM/NAND) | 1Gb + 1Gb | |
Dimension (mm) | 51mmx30mmx5.1mm | |
weight (g) | About 11g | |
temperature | Working temperature | -20℃~ +70℃ |
extension temperature | -30℃~ +75℃ | |
Storage temperature | -40℃~ +85℃ | |
humidity | Working humidity | 5%~95% |
certification | ROHS certification | Comply with ROHS standards |
CE certification | Comply with FCC/GFC/CE/CCC standards,optional |
Apperance
attribute | module | notes |
appearance | ||
dimension | 51x30x5.1mm | |
weight | ||
interface | MINI-PCI | 52Pin |
Module Mini-PCI interface definition | ||||
Pin | Standard Mini-PCI | Module pin definition | Pin Description | Direction |
1 | WAKE# | AP2CP_WAKE | The module function signal will be waked up by AP when high voltage 1.8V | Module input |
2 | 3.3Vaux | VBATT_IN | input voltage range:3.2V~4.2V,general value 4.0V | Module input |
3 | COEX1 | CP2AP_WAKE | Module wakes up AP signal when the pin is with high voltage (1.8V) | Module input |
4 | GND | GND | GND | |
5 | COEX2 | TDD_TX | TX mode of amplifier gets enabled when the pin is at high voltage(3.3V) | Module output |
6 | 1.5 V | NC | ||
7 | CLKREQ# | TDD_RX | Receive mode of amplifier gets enabled when the pin is at high voltage (3.3V) | Module output |
7 | CLKREQ# | TDD_RX | Receive mode of amplifier gets enabled when the pin is at high voltage (3.3V) | Module output |
8 | UIM_PWR | VSIM_1V8_3V0 | SIM/USIM card power, | Module output |
9 | GND | GND | ||
10 | UIM_DATA | SIM_DATA | SIM/USIM card data signal | Module two-way |
11 | REFCLK- | TDD_EN | Additional amplifier gets enabled when the pin is at high voltage (3.3V) | Module output |
12 | UIM_CLK | SIM_CLK | SIM/USIM card clock signal | Module output |
13 | REFCLK+ | CP2AP_READY | When modem finishes synchronizing,send “READY” signal to AP,high voltage indicates ”Ready” | Module output |
14 | UIM_RESET | SIM_RST | SIM/USIM card reset signal | Module output |
15 | GND | GND | ||
16 | UIM_Vpp | NC | ||
17 | Reserved | NC | ||
18 | GND | GND | ||
19 | Reserved | CP2AP_DEAD | Module gives “crash” signal to AP | Module output |
20 | W_DISABLE# | NC |