-
Battery Testing Equipment Battery Simulation High Altitude Low Pressure Test Chamber PLC Brand: HBYIQI Compliance with relevant standard test requirements or equivalent requirements: IEC62133 UL1642 UN38.3 GB 31241-2022 Applicance: With the wide ...
Battery Testing Equipment Battery Simulation High Altitude Low Pressure Test Chamber PLC Brand: HBYIQI Compliance with relevant standard test requirements or equivalent requirements: IEC62133 UL1642 UN38.3 GB 31241-2022 Applicance: With the wide ... more
Brand Name:HBYIQI
Model Number:HB-DC07-B-125L
Place of Origin:China
-
EV Connector Testing Equipment Standard Test Probe B IEC 62196 Complied Standards & Clauses Conforms to IEC 62196-1:2022 clause 10.1. IEC 62196-1:2022 clause 10.1. Equipment Overview This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test...
EV Connector Testing Equipment Standard Test Probe B IEC 62196 Complied Standards & Clauses Conforms to IEC 62196-1:2022 clause 10.1. IEC 62196-1:2022 clause 10.1. Equipment Overview This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test... more
Brand Name:Sinuo
Model Number:SN2210-2
Place of Origin:China
-
...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to
...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to more
Brand Name:PEGO GROUP
Model Number:PG-TPB
Place of Origin:China
-
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test more
Brand Name:Sinuo
Model Number:SN11010
Place of Origin:China
-
AC220V EV Battery Testing Equipment GB 8897 IEC 62133 Standard Battery Impact Tester Instruction: Put the battery on the plane.Put a bar at a diameter of 15.8mm(5.8inch)crosswise on the central positio.Drop a 9.1-10kg object at the height of 610±...
AC220V EV Battery Testing Equipment GB 8897 IEC 62133 Standard Battery Impact Tester Instruction: Put the battery on the plane.Put a bar at a diameter of 15.8mm(5.8inch)crosswise on the central positio.Drop a 9.1-10kg object at the height of 610±... more
Brand Name:KingPo
Place of Origin:China
Minimum Order Quantity:1
-
8Channel EV Battery Test Equipment Manufacturers Discharge Battery Testing System Features 1. High-level power density system with multi-channel integration and capable for energy recovering. 2. HMI operation, smart calibration. 3. ...
8Channel EV Battery Test Equipment Manufacturers Discharge Battery Testing System Features 1. High-level power density system with multi-channel integration and capable for energy recovering. 2. HMI operation, smart calibration. 3. ... more
Brand Name:Neware
Model Number:CE-6008n-60V20A-H
Place of Origin:China
-
... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ...
... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ... more
Brand Name:HJ
Model Number:HK1503
Place of Origin:China
-
..., fire or explosion. The electrodynamic vibration test system is a precision test equipment that simulates the actual working environment of a battery. The vibration test system consists of four parts: vibration test bench, power amplifier, controller and
..., fire or explosion. The electrodynamic vibration test system is a precision test equipment that simulates the actual working environment of a battery. The vibration test system consists of four parts: vibration test bench, power amplifier, controller and more
Brand Name:HongCe
Model Number:HCVT01
Place of Origin:China
-
... is designed and manufactured according to IEC 60529 Degrees of protection provided by enclosures (IP Code), this equipment is widely used in lamps, electric and electronic products certification testing of IPX1,IPX2. This device has been widely adopted by
... is designed and manufactured according to IEC 60529 Degrees of protection provided by enclosures (IP Code), this equipment is widely used in lamps, electric and electronic products certification testing of IPX1,IPX2. This device has been widely adopted by more
Brand Name:kingpo
Model Number:KP-MV12
Place of Origin:china
-
IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC...
IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC... more
Brand Name:YUYANG
Model Number:YY613
Place of Origin:China
-
... cables and the determination of gas acidity by measuring ph and conductivity. Remark: - IEC 60754-1, 2 Electric Cables Halogen Acid Gas Release Tester, Cable Corrosion Tester measures gas volume of Halogen Acid (IEC 60754-1), pH concentration(PH Meter,
... cables and the determination of gas acidity by measuring ph and conductivity. Remark: - IEC 60754-1, 2 Electric Cables Halogen Acid Gas Release Tester, Cable Corrosion Tester measures gas volume of Halogen Acid (IEC 60754-1), pH concentration(PH Meter, more
Brand Name:DAXIAN
Model Number:DX8332
Place of Origin:China
-
... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and ...
... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and ... more
Brand Name:HTI
Model Number:HTB-046
Place of Origin:Guangdong,China(Mainland)
-
...Test Chamer 100kg Transportation Vibration Tester for package Test Application Universal Vibration Test Machine/Simulated Transport Vibration Tester is applied to test the vibration-resistance of packed Toys, electronics, furniture, gift, ceramics, equipment, etc., under simulated transport conditions, according to American and EU transport standard (ASTM,IEC...
...Test Chamer 100kg Transportation Vibration Tester for package Test Application Universal Vibration Test Machine/Simulated Transport Vibration Tester is applied to test the vibration-resistance of packed Toys, electronics, furniture, gift, ceramics, equipment, etc., under simulated transport conditions, according to American and EU transport standard (ASTM,IEC... more
Brand Name:SKYLINE
Model Number:SL-T18
Place of Origin:China
-
ISO Dust Chamber Testing equipment With Stability Test in blue and white color The Sand Dust Testing equipment is suitable for detecting the sealing performance of the product's shell,mainly to simulate the damage caused by the sandstorm weather to locks,...
ISO Dust Chamber Testing equipment With Stability Test in blue and white color The Sand Dust Testing equipment is suitable for detecting the sealing performance of the product's shell,mainly to simulate the damage caused by the sandstorm weather to locks,... more
Brand Name:Envsin
Model Number:ESC
Place of Origin:Guangdong
-
...high pressure and temperature water jetting at degree IPX9 (IPX9K).. ●High pressure test ●high temperature test Technical Specification Model R9K-1200 Name IEC 60529 IPX9k Equipment Internal dimensions (mm) 1000*1200*1000 D*W*H Overall dimensions (mm)
...high pressure and temperature water jetting at degree IPX9 (IPX9K).. ●High pressure test ●high temperature test Technical Specification Model R9K-1200 Name IEC 60529 IPX9k Equipment Internal dimensions (mm) 1000*1200*1000 D*W*H Overall dimensions (mm) more
Brand Name:LIB
Model Number:R9K-1200
Place of Origin:china
-
IEC Standards Shock Test System With Payload 25kg, Max. Acceleration Up To 30000g Shock Test System Shock test is used to accurately measure the product fragility and evaluate the protective ability of product packaging. To do a boundary assessment on ...
IEC Standards Shock Test System With Payload 25kg, Max. Acceleration Up To 30000g Shock Test System Shock test is used to accurately measure the product fragility and evaluate the protective ability of product packaging. To do a boundary assessment on ... more
Brand Name:LABTONE
Model Number:HSKT25
Place of Origin:CHINA
-
IEC 60112 Lab Tracking LeakageTester Tracking Index Test Chamber Technical Parameters: Electrode Materials The electrode caput of brass-platinum Controller 7 inch TFT touch screen Electrode Distance 4.0mm±0.1mm,60±5°angle Test Voltage 100~600V adjustable, ...
IEC 60112 Lab Tracking LeakageTester Tracking Index Test Chamber Technical Parameters: Electrode Materials The electrode caput of brass-platinum Controller 7 inch TFT touch screen Electrode Distance 4.0mm±0.1mm,60±5°angle Test Voltage 100~600V adjustable, ... more
Brand Name:SHC
Model Number:SC-LTT
Place of Origin:China
-
Temperature Rise Tester TR-1 Product details: The device is made and manufactured according to the related standard requirement of temperature rising, such as IEC 60884 – 2006 (Figure 44), VDE0620 etc. It is applicable to the temperature rising of ...
Temperature Rise Tester TR-1 Product details: The device is made and manufactured according to the related standard requirement of temperature rising, such as IEC 60884 – 2006 (Figure 44), VDE0620 etc. It is applicable to the temperature rising of ... more
Brand Name:KeRang
Place of Origin:China
standard:IEC 60884 – 2006
-
...Connector Test Equipment B Series Connectors Low voltage push-pull connectors for data, signal, electrical and power use! Himo connectors are used in instrumentation, medical devices, and anywhere a high density, high reliability, quick mating connector is needed. These high precision connectors...
...Connector Test Equipment B Series Connectors Low voltage push-pull connectors for data, signal, electrical and power use! Himo connectors are used in instrumentation, medical devices, and anywhere a high density, high reliability, quick mating connector is needed. These high precision connectors... more
Brand Name:HIMO
Model Number:FGG.EGG.PHG
Place of Origin:china
