Otal Power About 9kw Temperature Humidity Chamber Jd-8002 Laboratory Dedicated Oven

Otal Power About 9kw Temperature Humidity Chamber Jd-8002 Laboratory Dedicated Oven​

Product Usage:

This oven is designed for laboratory, laboratory, hospital and various electronic product baking, epoxy resin hand baking, electrical pouring, and baking of various magnetic accessories, baking and drying at the specified temperature. , disinfection, heat treatment aging and other heating applications.

Features:

Energy-saving: After the temperature rises to the set temperature, the PID intelligent thermostat automatically enters the energy-saving state to turn off most of the heating wire power supply, effectively controlling
The power consumption is reduced; and the longer the start-up time, the more energy-saving is, which is about one-tenth of the energy consumption of the same industry.
(The test result is: the energy loss can be reduced by about 80%~90% when entering the energy saving stage)
 Heating method: PID+S.S.R is more stable
Circulation mode: forced horizontal circulation air supply
Safety device: ultra high temperature protection, overload automatic power off system, safer
Control mode: intelligent controller PID automatic calculation, compensation, calibration More precise
The controller is located above the machine, single door
The inner material is #SUS 316 stainless steel plate, and the outer material is made of high quality 304 stainless steel matte finish.
The insulation material is imported high-density glass rock wool, which has good heat insulation and maximum temperature insulation. The anti-tight and tight material is high temperature resistant rubber, which can withstand high temperature of 600 degrees for a long time.

Temperature Control System

The temperature control is PID micro-automatic calculation of PV/SV simultaneous display. It can set any temperature condition within the temperature range according to actual needs, and can ensure the accuracy of its temperature control through the PID parameter setting in the table. The system of the belt self-calculated to obtain appropriate temperature control parameters.

The temperature input force CA(K) TYPE output is 12V.
The current controller is a SSR contactless relay that maintains high current stability.
The heating material is imported nickel-cadmium alloy heating wire, which is non-polluting and has a long service life.

Air supply system

Forced horizontal air supply circulation, the wind source is driven by the circulating motor to drive the wind wheel through the electric heater, and the hot air is sent from the air duct to the inside of the oven, and the hot air is sucked into the air duct as a source to be recirculated and heated, thereby reducing energy loss and Ensure the temperature uniformity inside the box, when the door opening and closing action causes disturbance, the air circulation system can quickly return to the operating state temperature value.

The motor is imported from Taiwan for long-axis high temperature type, and the power is 1HP50Hz.
The fan is a multi-blade turbine type with high strength and an adjustable guide air deflector for smoother circulation of the wind.

safety protection

Ultra high temperature protection, no fuse switch, porcelain fuse, motor overload protection.
Timer 9999 seconds ~ 9999 hours (H.M.S switch and decimal point position setting)
When the temperature is up, the time is cut off, the heating is stopped and the alarm is stopped.

Technical indicators

Heating system and its working principle

Heating system Built-in nickel-chromium alloy heater, non-polluting and long service life;

Temperature cycling system

Temperature cycle mode Forced circulation ventilation, balance thermostat (BTC). The method not only refers to the continuous operation of the circulation system, the control system controls the output of the heater according to the result of the PID automatic calculation output according to the set temperature point, and finally achieves a dynamic balance.

control system

Temperature measurement PT100
The temperature control is PID PID automatic calculation PV/SV simultaneous display, the required temperature can be freely set according to the individual's will within the allowable range of the machine temperature, and the accuracy of temperature control can be ensured by the PID parameter setting in the table. It can also be calculated by the system itself to calculate the appropriate temperature control parameters.
The temperature input force CA(K) TYPE output is 8V.

                                                              Dongguan Jiedong Test Equipment Co., Ltd.
                                                                      

Business overview:

Dongguan Jiedong Test Equipment Co., Ltd. is located in Tangxia Town, Dongguan City. After years of hard work, Jiedong has established a production base in Dongguan, research and development, sheet metal, production, sales, after-sales, leasing, testing, and governance. With one-stop services such as import and export. The company has always focused on the technology and laboratory solutions of the most reliable reliability environmental testing equipment, and has become the national high-tech enterprise, the executive director unit of China Aerospace Systems Science and Engineering Research Institute, and the governing unit of Dongguan Metrology Association. lSO14001: 2015 environment, lSO9001: 2015 quality system certification. The products are constantly improving, and the customers are in the scientific and technological fields of scientific research, military industry, national defense, colleges, quality inspection, automobile, new energy, battery, optoelectronics, artificial intelligence, precision electronics, power tools, medical, communication, etc. After-sales service, each link takes the customer's point of view and needs as the starting point for thinking, and adheres to the line of excellence and continuous improvement.

Management mechanism:

Jiedong passed and strictly implemented the ISO9001:2008 quality management system, ISO14001-2004 environmental system certification, European CE product certification, OHSAS18001 occupational health and safety management system certification. Carefully implement GB, GJB, IEC, MIL, JB, ZBY and other product standards; Jiedong strictly follows the 7S management method and ERP mechanism, and explores the unique and effective specialization for the environmental test equipment industry's many years of characteristics and experience. The management methods of research, production, sales and service can provide customers with all kinds of ring test products and services with high quality, high efficiency and precision.

Main products:

※  Environmental simulation test equipment: constant temperature and humidity chamber, high and low temperature test chamber, thermal   

     shock test chamber, salt spray test chamber, xenon lamp aging test chamber, rain test Inspection box, ultraviolet aging test chamber, dust     

     test chamber, rain test chamber, high temperature precision oven, simulated transport vibration table, etc.;

※ Battery safety performance testing equipment: battery extrusion testing machine, battery needle testing machine, battery explosion-proof test

    box, battery burning test box, high-altitude low-pressure mode Preliminary test chamber (low pressure test chamber), drop test machine,     

    heavy impact test machine, thermal shock test chamber (heat abuse test chamber), battery needle punching and extrusion Machine, battery

    short-circuit test machine, battery washing test machine, seawater immersion test machine, battery pack reverse test machine, battery safety

    performance comprehensive test laboratory, etc.;

※ Material mechanics testing equipment: electronic tensile testing machine, computerized tensile testing machine, universal testing machine,

    high and low temperature tensile testing machine, four-point compression testing machine,Table type tensile testing machine, horizontal         

     tensile testing machine, etc.;

※  Mobile phone and notebook testing equipment: Click the line test machine, compression test machine, compression life test machine, twist

     test machine, drop test machine, shaft life Life test machine, etc.

※  Wire testing equipment: wire bending (swinging, bending) testing machine, FPC folding test machine, wire bending resistance testing

     machine, taper rocking test machine, line Material elongation (elongation) test machine, etc.;

※  Key detection equipment: button life test machine, switch rotation life test machine, button fatigue life test machine, fully automatic button,     

    switch load strokeLine testing machine, etc.

※ Terminal insertion and removal testing equipment: plug-in life testing machine, insertion force testing machine, fully automatic insertion force

     testing machine, etc.;

※  Abrasion test equipment: anti-friction test machine, ink decolorization test machine, alcohol rubber wear test machine, etc.;

※  Leather and rubber testing equipment: TABER wear tester, Martindale wear tester, low temperature cold resistance tester, leather     

     endurance  tester, color fastnessTesting machine, linear abrasion testing machine, rubber oil resistance testing machine, etc.;

※  Combustion test equipment: vertical horizontal burning test machine, needle flame burning test machine, glow wire test machine, automobile

     interior material burning test machine, large-scale combustion Cabinet, leakage tracking test machine, etc.;

※  Other testing equipment: lithium battery moisture measuring instrument, falling ball impact testing machine, shotgun impact testing machine,

     etc.;

Application areas:

Dongguan Jiedong Test Equipment Co., Ltd. has excellent research and development products, advanced equipment and complete testing means. The company has first-class technical talents and management talents, which makes the company's products always in a good position in the same industry. Dongguan Headquarters Factory is located in Dongguan City, which is known as the world factory with convenient transportation and developed manufacturing industry. Our products are widely used in scientific research, military, electronics, electrician, LED, automotive, plastic, hardware, toys, paper products, chemicals, household goods and other industries, and are applicable to various research units, quality inspection organizations, academic discussions and other fields. To provide customers with a variety of testing and testing equipment in line with national standards and related industry standards, international standards (GB, GJB, IEC, MIL, DIN), to achieve international quality, localized prices.

Phone: 86-0769-26265799

Address: No. 17, Sanheng Road, Lianhu South, Tangxia Town, Dongguan City, China