12GA Or 14GA Removable Blanket Insulation Jacket Lacing Hook With Speed Washer

Quick details of the Insulation Jacket Lacing Hook

• for the round hook base material, we must choose high hardness mild steel material or stainless steel material, it will increase the support strength .
• for the anchor pin material, we must choose the soft metal wires, it is better of annended steel wire or stainless steel wire. the suitable diameter of pins are 12GA and 14GA, 2MM is most suitable for stainless steel wire.
• Riveting firmly is most important for lacing anchors. hardness base and soft pin is most suitable for increasing firmly.
• Usually, lacing anchor is wildy used self locking washer, lacing ring and lacing wire to fixing the removable balanket insulation jacket.

specification details of Insulation Jacket Lacing Hook

Image details of Insulation Jacket Lacing Hook

Lacing Anchors are used in the fabrication of insulation blankets or removable covers/pads. The nail is pressed through the insulation material, so the hook portion sits on the top edge and the nail is secured on the opposite side of the insulation with a washer. The two sides of the blanket can then be "laced" together by the hooks with tie wire.

HEBEI XIANGYI METAL PRODUCT CO., LTD

HEBEI XIANGYI METAL PRODUCTS CO.,LTD

Main Production-Metal Ring Mesh, Chainmail Scrubber, Metal Mesh Curtain, Instulation Fasteners, Solar panel Clips

• Pattern Design services

• Frame Design services

• Installation System Design Services

• Install parts Services

• Surface Treatment Services