Vertical Knife Punch Pneumatic Cylinder Acting Pressure Min.5kgf/C㎡

Product Description

1.Working pressure: The pump can operate within a pressure range of 0.4 megapascals (MPa) to 0.6 MPa. This can also be expressed as 4 kilograms-force per square centimeter (kgf/cm²) to 6 kgf/cm². The compressed air used to filter the pump should also be within this pressure range.

2.Transmission oil: The pump is designed to work with a specific viscosity grade of oil, which is ISO VG32 or an equivalent viscosity grade.
Working temperature: The pump can operate within a temperature range of 0 degrees Celsius to 60 degrees Celsius.
Split out quantity: The pump can output four different quantities of oil, which are 150cc, 110cc, 70cc, and 50cc.
Voltage: The pump can operate with three different voltage levels, which are DC24, AC110, and AC220.

Suitable for direct drive spindle, motor built-in spindle, etc., special for high-speed cutting:
The hydraulic motor or spindle is designed to be used in direct drive applications, such as motor built-in spindles.

The motor or spindle is specifically designed for high-speed cutting, indicating that it is capable of operating at high speeds while maintaining its performance and reliability.

Order Form

BMV--10--U--16--M--70--MA

1) 2) 3) 4) 5) 6)

Our production:

FAQ

Q1: We have our own factory and can provide the best price and service.

Q2: We accept customization or non-standard products.

Q3: The MOQ depends on the customer's needs, and trial orders are welcome before mass production.

Q4: The delivery time is 7 days if the company has stock, and 15-30 working days if we don't have stock. However, the delivery time also depends on the quantity and requirements of the products.

Q5: The company's payment terms are T/T.

Q6: The company does not provide samples.

The factory was established in June 1979, has been in automation industry for more than 45 years and now is one of major makers to produce hydraulic cylinders,hydraulic station and to serve as system integrator of fluid power and transmission control fields.

With 45 years′ development, we have the experienced and innovational team of R&D who can make the products according to your drawing or samples, and our skilled and qualified QC can ensure the quality of our products. We have passed the ISO9001: 2000(quality management system), ISO14001: 2004(environmental management system) and GB/T 28001-2001(occupational health & safety management system).

We can provide a one-stop service: Customer demand-Design-Drawing-Prototype-Testing-Confirmation-Mass Production-Delivery of finished products.

The good quality with reasonable price and punctual delivery, we believe you will be interested in our products and our brand will be deeply impressed by you.