Super Thin Exterior Water Based Latex Paint Fire Protection For
Metal Steel
Product Description
steel structure fireproof paint
Super thin steel structure water borne fireproof paint is made of
high efficiency flame retardant and light insulation material. The
finished paint is thin, and has stable
physical&chemical properties and fireproofing function. When
encounter fire, the paint could rapidly expand and form a
compact&uniform carbonized protective layer, and generate
decompose&endothermic reaction to prevent heat transfer and
extend the refractory time of steel structure.
Specification :
Product Color | White liquid |
Film Paint Color | White |
Fireproof rating | 30-180min, depend on the film thickness |
Construction Usage | 3.1 kg/sqm |
Surface Drying Time | 3 hrs |
Hard Drying Time | 8 hrs |
Film thickness | Less than 3mm(as per china standard) |
Color Customization | Support |
Water Proof rating | More than 24 hours |
PH | 7-8 |
Consturction Ambient Temperature | Between 5ºC (41ºF) and 30ºC (95ºF) |
VOC | / |
Shelf Time | 6 months |
Application Method | Brush/spray/roller |
Range of application
Used in Indoor and outdoor steel structure,such as factories ,
warehouses ,real estate and other building
Main Features
Excellent fireproofing performance
Easy application and good decoration effect
Stable physical and chemical properties
Good adhesion force, hard to produce peeling
Construction process
The first times of mixing ratio of water: agent: LG should be
(60~75):40:40.Then the following times of mixing ratio should be
(60~75):40:80, then the water, adhesion agent and powder proportion
shall be (90~110):40:80;(80~120):40:80.
Then agent should be added to water first and stir them thoroughly,
then add LG into the mixer. The coating should be used over within
90 minutes after mixing . Additional water might be added depending
on air condition and application tools.
We can adjust the water ratio in accordance with the real
situation.
Construction site
Packaging Details: 20kg/bag. Transported as general chemicals.
Delivery Detail: about 15 days after receipt of payment
Certification
We’ve got ISO9001, all Chinese national tests and certification,
SGS , REACH, ROHS.
UL,ASTM and other international certifications are on-going.
FAQ
How/Where to Use
What Are The Most Common Applications For Zhuoan’s Fireproof
Coating?
The most common applications for Zhuoan’s Fireproof Coating are in
the building industry. Historic architecture,wood cottage,
furniture,lumber, OSB, polywood, wood fire resistant coating top
the list. Hotel, hospital, theater, school ,airport, mall, factory
are also a common usage with steel fire resistant coating.
Can Zhuoan’s Fireproof Coating Be Applied Over Existing Rust And
Corrosion?
With wood Fireproof Coating,the substrate surface must be clean,dry
and free from contamination, such as dust,oil stain,water
stain,etc.With steel Fireproof Coating, only a NACE 3 / SSPC-SP 6
commercial blast cleaning is typically necessary.
Application and Training
What Does The Preparation Process Entail?
Only a NACE 3 / SSPC-SP 6 commercial blast cleaning is typically
necessary. There is no need to blast to NACE 1 or 2 since slight
oxidation on the surface allows for the best chemical reaction.
Can The Speed Of Reaction Be Slowed Down To Increase Working Time
Before It Is Cured?
There are various ways to decrease reaction time, but they are
specific to the material being coated and environmental factors. We
will advise you on this during the consultation.
What Thickness Is Recommended?
For wood Fireproof Coating,11.81mils; for steel Fireproof Coating,
118.11~1968.5mils, specific to the material being coated and fire
resistant standard.
Do I Need Special Equipment In Order To Apply Zhuoan’s Fireproof
Coatings?
Zhuoan’s fireproof coating applied using a plural (2K) spray gun or
brush or roller. For spray model, the coating uses specific ratio,
and sprays on using standard plural spray equipment that mixes at
the nozzle of the spray gun. The process requires no heating
equipment or other apparatus besides the plural spray gun.
What Does The Certification Process Entail?
Training is at our facility or yours. We teach you how to use it,
the application process, and how to recognize proper effect.
Experienced painters generally pick up the technique and understand
the minor differences in a few minutes. We recommend two days of
training to allow ample time to cover maintenance of the equipment,
trouble shooting, and to understand the technology.
Who Can Apply Zhuoan’s Fireproof Coatings?
Zhuoan’s Fireproof Coatings can be applied by either:
• An Zhuoan’s Fireproof Coatings certified contractor
• Product manufacturers who have been trained by Zhuoan
If Overspray Happens On Adjacent Surfaces Can It Be Easily Removed?
Zhuoan’s Fireproof Coatings can only be removed by sandblast or
grit media. Our training team will educate your staff on the
process to minimize overspray.
Purchasing Zhuoan’s Fireproof Coatings
There may be an Zhuoan’s Fireproof Coatings distributor near you.
If you are unable to find a distributor or certified applicator
near you, please contact us so that we can arrange direct shipment
to you.
How Do I Buy Fireproof Coatings?
Zhuoan’s Fireproof Coatings can be purchased through an Zhuoan
distributor or by contacting us directly.