High Low Temperature Humidity Test Chamber Environmental Humidity Test Chamber

High Low Temperature Humidity Test Chamber Environmental Humidity Test Chamber

The humidity test chamber is suitable for the whole machine, parts, materials for constant high temperature, low temperature or temperature cycle conditions test.The humidity test chamber can be used for the heat dissipation test sample and non-heat dissipation

test sample test. For the test of heat dissipation test sample, heat dissipation power can not exceed the cooling capacity of the refrigeration system of humidity test chamber, because the control of temperature is a dynamic balance process, at different temperature points, the cooling capacity of the refrigeration system is also accompanied by changes.

Integral, (the humidity test chamber door direction is in front) front for the studio, the refrigeration unit, after the electric control cabinet and electric control actuator, the main control interface is located in front of the humidity test chamber, the expansion control panel is located in the right side of the humidity test chamber. The door is open in the width direction. At the back of the studio, there are circulating air duct system and air conditioning system: centrifugal fan, air guide, heater, refrigeration heat exchanger, temperature sensing device.

• Outer chamber material: cold rolled steel plate + double-sided electrostatic spraying process
• Inner chamber material: SUS304 high-grade stainless steel plate
• Insulation material: rigid polyurethane foam + aluminum silicate insulation layer

• Bearing capacity of test chamber floor: ≤120kg (uniform load)
• Test chamber sample frame bearing capacity: ≤20Kg (uniform load)
• The total weight of the test box shall not exceed 150kg

The closed-loop feedback heating control system is composed of temperature sensor, central controller, solid-state relay drive module and heater actuator. Through THE P.I.D control calculation method, the temperature compensation control of the test chamber studio can be carried out in real time and dynamically.

For over 20 years, Envsin has been a trusted provider of environmental simulation and reliability testing solutions. We’ve served more than 170 Fortune 500 companies and over 1,000 small and medium-sized enterprises across 37 countries worldwide. Our expertise spans the development and production of standard and custom testing chambers, including constant temperature and humidity chambers, high and low temperature chambers, thermal shock chambers, aging chambers, and large-scale walk-in chambers. We also specialize in complex environmental testing chambers for salt spray, dust, water resistance, rain, light exposure, pressure, and more.

Guided by the principles of dedication, professionalism, innovation, and excellence, Envsin is committed to creating a sustainable future through advanced testing solutions. Our team is focused on becoming a global leader in the industry, advancing technological progress, and consistently contributing to the development of the instrument testing sector.