|
| Categories | Ultrasonic Flow Transducer |
|---|---|
| Brand Name: | TaiMI |
| Model Number: | TM-11C-1mhz RED Ultrasonic flow sensor |
| Certification: | ROHS/REACH |
| Place of Origin: | CHINA |
| MOQ: | Negotiable |
| Price: | Negotiable |
| Payment Terms: | Western Union,MoneyGram,T/T,PAYPAL |
| Supply Ability: | 10000000/Month |
| Delivery Time: | 2 weeks |
| Packaging Details: | safety packing |
| TYPE: | Waterproof type |
| Material: | Polymer material + titanium alloy |
| Frequency: | 1MHZ 1mhz ultrasonic flow sensor |
| USE: | liqiud flow meter, or as liquid level sensor |
| Size: | 11mm small size flow sensor |
| Case material: | Epoxy resin potting |
| internal material: | Piezoelectri c ceramics |
| Workingtem perature ℃: | 5~100 |
| Protection class: | IP68 |
| MPa: | 2.6 |
TM-12SL-1MHZ BLACK | |||||
Part NO. | TM-12SL-1MHZ BLACK | resonant frequency | 920±30KHZ | static capacitance | 450pf±15% |
Resonant Impedance | ＜300Ω | Waterproof | IP68 | operating temperature | 0.1～80℃ |
withstand voltage | ＜2.6Mpa | Transmitting beam Angle | 5°-10° | receive sensitivity | ≥120mv(half-wave) |
shell material | Polymer material | installation dimension | φ15mm | operating voltage | ≥3v |
sealing method | Epoxy resin potting | lead wire location | Sensor center | Cable type | |
Test Method
1. Test Conditions
The test should be conducted at the temperature of (25±3) ℃ and the relative humidity of 40% ~ 70% R.H. In the environment.
2. Test Method
项目 | test method |
center frequency(Fr) | Measurement of thickness vibration mode by Agilent5100E impedance analyzer |
Resonant Impedance(R0) | |
electrostatic capacity(CP) | LCR meter,1KHz/1V |
Precautions
1. The ceramic body of the sensor chip is mainly composed of lead zirconate titanate ceramics. Please ensure that the ceramic body complies with local environmental regulations when discarded.
2. The performance parameters mentioned in the specification refer to isolated components. Please fully estimate the influence of other factors when used in the whole circuit.
3. Sensor conductor, red is positive electrode, black is negative electrode. Needle insertion: long for the positive pole, short for the negative pole.
4. If you have any question about this specification, please contact and negotiate.
DN15,DN20,DN25 piep
|
1MHz High Temperature Resistance Ultrasonic Flow Sensor with Stainless Steel AISI316 for Water Flow Measurement
Water Meter Ceramic Ultrasonic Transducer 1Mhz Ultrasonic Flow Transducer
TM-P23X angled transducers ultrasonic flow sensor 1Mhz 45° angle water meter sensor
Stainless Steel 316 1MHz Ultrasonic Flow Sensor with 130℃ High Temperature Resistance for Ultrasonic Flow Transducer
1MHZ Frequency 12mm Size Ultrasonic Flow Transducer with 130℃ High Temperature Resistance and All Stainless Steel Material
12mm Small Size Ultrasonic Flow Sensor with High Sensitivity and IP68 Protection for Water Meter Applications
1MHz Waterproof 20mm Water Flow Sensor Ultrasonic Flow Transducer
Water Resistant Flow Gas Sensor 200kHz Piezo Flow Sensor
1MHz 2MHz Liquid Flow Rate Sensor Ultrasonic Flow Transducer
Dedicated 200KHz Ultrasonic Flow Transducer For Gas Meter Ut Transducer
