| Categories | MBR Membrane |
|---|---|
| Brand Name: | SINOMEMB |
| Model Number: | SNU-P |
| Certification: | NSF |
| Place of Origin: | China |
| MOQ: | 5 |
| Packaging Details: | Standard export packaging |
| Core Components: | MBR |
| Product name: | hollow fiber for ultrafiltration membrane |
| Pore size: | customized., from 1μm to 0.05μm, 0.01micron, 1.0μm, 0.2μm |
| Usage: | Waste water treatment, , Liquid Filter, remove bacterias, Purification |
| Module: | Out-inside |
| Nominal Pore Size: | 0.01μm |
| Membrane Material: | PVDF |
| Product Specifiation | ||||||||
| Product Picture | Item No:PVDF Hollow fiber-SNU-O | |||||||
| 1.Model:PVDF 2.Appearance: 3.Pore size:0.1Micron 4.inner diameter:0.7mm 5.OD(outer diameter):1.3mm 6.Breaking point pressure MPa > 0.50 (alcohol) 7.Test moisture content:≤10% 8.Initial water flux of single filament:≤500L/㎡.h 9.Tensile strength at break (N) > 3.3 10.Elongation (%) > 160 11.nitial bubble point pressure MPa > 0.25 | ||||||||
| Packing : | 1.In 2.CBM: 3.N/G weight | |||||||
Operation Guide
During the operation of the UF system, it is necessary to avoid
sudden changes in pressure during system start-up, shutdown,
operation, cleaning, maintenance, etc., as well as exceeding the
maximum withstand pressure specified in this manual, to prevent
possible membrane breakage, sealing, etc. End fall off, membrane
shell cracking and other serious damage consequences; this series
of products have been treated with anti-corrosion and membrane wire
protection before leaving the factory, and the inner membrane wire
of the module is in a semi-dry state. For manual operation, the
water production rate should be set to 50% of the design water
production rate, and the initial water production must be
discharged directly and cannot be used as product water.
Product usage tips
The normal start-up and normal cleaning and maintenance of the UF system are the key to ensure the long-term normal use of membrane products. Before starting the system, it should be ensured that the parameters of each valve, instrument, pre-processing equipment, signal transmission equipment, power equipment, etc. meet the design specifications and requirements, so as to ensure the safe, stable and up-to-standard operation of the overall system. Please refer to the product technical manual for the debugging and testing work of the system in the early stage.
|
China PVDF UF Membrane with 51 m2 Surface Area and 0.03 μm Nominal Pore Size for Industrial Wastewater Treatment wholesale
China PVDF MBR Membrane with 72 m2 Surface Area and 216×2160mm Size for Immersion Negative Pressure Suction Filtration wholesale
China 0.01mm Pore PVDF Hollow Fiber Membrane 29M2 Surface Area For Water Treatment Systems wholesale