3 Fibers 1550nm 1x2 Non Latching Fiber Optical Switches
|
...Non-latching Fiber Optical Switches 1310/1550nm Fiber Optical Switch The single 1x2 optical switch is a standard 1x2 configuration with 3 fibers and 2 states. GEZHI fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using mechanical......
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
Non Latching Fiber Optical Switch 1x1 1260-1670nm Low Insertion Loss 0.5dB
|
optical switch 1x1 A 1260-1670 nm Latching and Non-latching Low Insertion Loss Insertion Loss Typ 0.5dB optical route pins 1×1A Optical Path Electric Drive Sensor Status Pin 1 Pin 2 Pin3 Pin4 Non- Latching Close GND GND OPEN P1- P2 V+ GND CLOSE Latching Close -- -- V+ GND P1- P2 GND V+ -- -- Electrical parameters Voltage current Resistor 5V Latching 4.5~5.5 36~44mA 125Ω 5V Non-Latching 4.5~5.5 26~32mA 175Ω 3V Latching 2.7~3.3 54~66mA 50Ω 3V Non...
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
1X2 Mechanical Optical Switch Latching / Non-Latching Low Insertion Loss
|
... optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. It's a passive component used for OADM system, OXC, monitor system and experience. Features:...
Shenzhen HiLink Technology Co.,Ltd.
|
3V 5V SM MM 1310 1550nm 1x2 Mechanical Optical Switch
|
... loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations. Features ♦ Low Insertion loss ♦...
Shenzhen Unifiber Technology Co.,Ltd
|
Mini Size 1x8 Opto-Mechanical Optical Switches 8x1 Latching Fiber optic Switch
|
...Mechanical Optical Switches 8x1 Latching Fiber optic Switch Mini 1x8 Mechanical Optical Switch GEZHI Series Mini 1x8 fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. Latching operation preserves the selected optical path after the drive signal has been removed. The switch......
Gezhi Photonics Co.,Ltd
|
1x1 Switch 5V DWDM MUX DEMUX Mechanical Optical Switch Non Latching
|
...tems for multiplexing and routing different channels of light into or out of a single mode fiber (SMF). This is a type of optical node, which is generally used for the formation and the construction of optical telecommunications networks. "Add" and "drop"...
Shenzhen UT-King Technology Co., Ltd.
|
HFBR-4503/4513z Avago non-latching plastic optical fiber (POF) versatile link cable assemblies patch cord
|
... Crimped and epoxied connector terminations for maximum retention strength 1 µm polish terminations ensure high optical coupling efficiency Product's Parameter 1.Fiber core Material: PMMA 2.Fiber optic core diameter:1.0mm (can customized accept 0...
ShenZhen Ruiara Co., Ltd
|
1x4 Mechanical Optical Switch Fast Optical Switch 1260~1650nm Wavelength
|
... to switch the optical path. the excellent design makes the product have the advantages of high stability, high reliability, low loss, which are widely used in the switching and protection of optical network. Features: ● Epoxy-free on Optical Path ●...
SHKE Communication Tech Co., Ltd.
|
1x4 Mechanical Optical Switch SM 1310nm 1550nm Low Insertion Loss
|
...Mechanical Optical Switch SM 1310nm 1550nm Low Insertion Loss 1x4 Mechanical Optical Switch SM 1310/1550nm 1m 900um FC/APC Description 1xN mechanical fiber optic switch manufactured by ANC International Co., Limited connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical...
ANC International Co., Limited
|
D2×2B Mechanical Bypass Optical Switch LC Connctor Singlemode Cross-Connect
|
D2×2B Mechanical Optical Switch Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High-Reliability Epoxy-free on Optical Path Latching and Non-latching Specifications Parameters Unit OSWD2×2B Wavelength Range nm 850±40 / 1300±......
Shenzhen Olycom Technology Co., Ltd.
|
Submit your “non latching mechanical optical switch” inquiry in a minute :