Four Chamber Environment Test Chamber High Low Temperature Tester Large Volume
|
Environment Test Chamber 4-Chambers High And Low Temperature Cycle Test Brand: HBYIQI Equipment Name: 4-Chambers High And Low Temperature Cycle Test Machine Relevant standards or equivalent requirements: Complies with the following tests in national ......
Guangdong Hengbang Testing Equipment Co.,Ltd.
|
Wet Heat Environment Test Chamber PV Module Wet Heat Test Machine IEC 61215
|
... environment for a period of time, so as to test whether the module has the ability to work in this environment. Applicable stand ards for wet heat test machine (environmental chamber): According to IEC 61215 and UL 1073 standards Test temperature 85ºC±2...
DONGGUAN LONROY EQUIPMENT CO LTD
|
ISO20653 Compliance IPX9K Test Chamber with High Pressure 8000-10000Kpa and SUS304 Stainless Steel for Auto Parts
|
ISO20653 IPX9K Ingress Protection test chamber High Temperature High Pressure for Auto Parts 1. Introduction IPX9K testing is the most strictly IP rating, it is applied to test all auto parts besides the passenger compartment. The reference standards ......
Pego Electronics (Yi Chun) Company Limited
|
Environment Test Chambers Aging Test Chamber Plastic plate UV aging tester
|
... of sunlight, heat, moisture on materials and coatings. It exposes specimen to varying conditions of weathering- ultraviolet radiation, moisture and heat to test the performance and improve the quality. Standards: ASTM D4329, D499, D4587, D5208, G154, G53;...
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
Constant Humidity Temperature Controlled Environment Test Chamber 80L
|
...Environment Test Chamber 80L Complied Standards & Clauses IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT” IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat......
Sinuo Testing Equipment Co. , Limited
|
ASTM B117 Aging Approved Corrosion Fog Salt Spray Environment Test Chamber
|
... Salt Spray Environment Test Chamber ASTM B117 Aging Approved Corrosion Fog Salt Spray Environment Test Chamber Advantages of Salt Spray Environment Test Chamber ● Heater strip housed in base of chamber, effectively & evenly heating, Easy to exchange......
BOTO GROUP LTD
|
IEC60068-2-1 Temperature And Humidity Test Chamber Environment Test Chamber 0 °C ~+150°C
|
...s test chamber is used for cold, heat, humidity and dryness testing of raw materials and devices such as electronics, electricians, electrical appliances, plastics, etc. The purpose is to confirm the products reliability of storage and transportation under...
Sinuo Testing Equipment Co. , Limited
|
Walk In Environment Test Chamber For Solar PV Damp Heat Tests
|
... (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the...
Guangdong Sanwood Technology Co.,Ltd
|
Stainless Steel SUS304 Environment Test Chambers Touching Screen
|
...Environment Test Chambers Stainless Steel SUS 304# Test Chamber Design Features: 1. High performance and quiet operation (68 dBA) 2. Space-saving designed for flush installation to wall 3. Full thermal break around doorframe 4. One 50mm diameter cable port o left, with flexible silicone plug 5. Accurate wet......
Guangdong ALI Testing Equipment Co,.Ltd
|
Temperature Humidity Stability Instrument Simulate Environment Test Chamber
|
... performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material. Standard: IEC600628 2-1/2/3/30, ISO 16750-4, JIS ......
Dongguan Liyi Environmental Technology Co., Ltd.
|